Switching Concepts: practice questions

How a switch learns MAC addresses, floods and forwards frames, and how ARP maps IP addresses to MAC addresses.

CCNA 200-301 v1.1, exam topic 1.13 · part of 1. Network Fundamentals, 20% of the exam

The same material in the CCNA 200-301 v2.0 exam: Connectivity Troubleshooting

What this topic covers

Learning and flooding
Switches learn source addresses and flood unknown destinations.
Frame forwarding decisions
Forward, filter or flood based on the destination MAC.
MAC address format
48-bit addresses written as six hexadecimal bytes.
Broadcast MAC address
All ones (FF:FF:FF:FF:FF:FF) reaches every station.
How the table is populated
Entries are learned from source addresses on ingress ports.
Ethernet frame fields
Preamble, addresses, type, body and CRC.
Broadcast domain boundaries
Routers bound broadcast domains; switches extend them.
Address resolution
Mapping an IP address to a link-layer address.
ARP cache
Learned mappings are cached and time out.
Reading ARP tables
Confirming address resolution worked.

Sample question

Try it, then open the answer. Our questions are written by AI and checked independently before they are published.

Easy Single choice

What is the function of the Ethernet frame check sequence?

  1. A. identifies the upper-layer protocol encapsulated within the payload
  2. B. provides clock synchronization for receiving physical interfaces
  3. C. detects transmission errors across the frame header and payload
  4. D. enforces the minimum length requirement for small payloads
Show the answer

Answer: C. detects transmission errors across the frame header and payload

The Ethernet frame check sequence (FCS) provides error detection by covering all fields from the destination address through the end of the payload using a cyclic redundancy check.

Further reading