Edge Ports and VLANs: practice questions

Access ports for data and voice, VLANs across switches, PoE, and the edge devices and access points they connect.

CCNA 200-301 v2.0, exam topic 2.2 · part of 2. Switching and Network Access, 25% of the exam

The same material in the CCNA 200-301 v1.1 exam: VLANs

What this topic covers

Why VLANs
Partition one physical switch into multiple logical LANs.
802.1Q tagging
A 12-bit VLAN identifier carried in the frame header.
Access ports
An access port belongs to one VLAN and exchanges untagged frames with the host.
Voice VLANs
A phone port carries a tagged voice VLAN alongside the untagged data VLAN of the computer behind the phone.
Power over Ethernet
Switch ports power phones, access points and cameras over the data cable, within the switch's power budget.
Ports for different devices
Desktops and printers use access ports, phones add a voice VLAN, and virtualization hosts serving several VLANs use trunks.

Sample question

Try it, then open the answer. Our questions are written by AI and checked independently before they are published.

Easy Single choice

What is the primary function of an IEEE 802.1Q trunk port?

  1. A. restricts access based on MAC addresses
  2. B. encapsulates traffic using 802.1Q tagging
  3. C. assigns dynamic IP addresses to hosts
  4. D. provides power to connected edge devices
Show the answer

Answer: B. encapsulates traffic using 802.1Q tagging

An IEEE 802.1Q trunk port carries traffic for multiple VLANs across a single physical link by inserting a VLAN tag into Ethernet frames to differentiate their source networks.

Further reading